Active Subscription Detail

This report provides a list of active Subscriptions within a specified time window, with detailed information about each item on that Subscription. The report provides a snapshot representing the current state as of run-time and displays a detailed view of the status and condition of every subscription, and of the individual products purchased. This report can be generated using Reports 1.0 or Reports 2.0 data engine.

Reports 1.0 data engine	Provides the data you need in the reports up to near real-time. Reports data is displayed in UTC time zone. Reports 1.0 lets you select which display columns to include in the report. Report generation is slow and typically lasts several hours.
Reports 2.0 data engine (default)	Supports 20 most commonly used Subscribe reports. Reports 2.0 operates in UTC time zone. You can select which time zone to use for the report data display. Reports display all the available columns. Data is available for the prior two years and up to the previous day according to UTC time. Report generation is quicker as data is prepared ahead of time, once a day. Note: For a list of reports 2.0, see Subscribe Reports using the Vindicia Data Platform —Reports 2.0

To generate a one time report:

Enter the date range
Optional. Enter an Email address where you’d like to receive notifications when the report is available. A single email address can be entered.
Select the Affiliate ID as relevant for the report. Select No Affiliate if not required.
Optional. For Reports 2.0, complete the following steps to select one or more specific products to include in the report.
1. Click the Products field. A list of the existing Products appears.
2. Enter the first letters of the relevant Product or scroll and select. The Product name appears.
3. To add an additional product, place your cursor in the field below the listed product and perform the previous steps again.
For Reports 2.0, select the relevant Time Zone for data range selection and display. Data is available for the previous day at 13:00 UTC time. Note: A notification error message appears when attempting to run reports for which data is not yet available. The report can be submitted and includes data up to the available time.
For Reports 1.0, select the Display Columns you’d like to include in the report.
Click Submit. View the report in the My Reports page.

To schedule a recurring report:

Toggle Recurring toggle to Yes.
Select a date for the first reporting period. Note: Reports display data occurring starting from the defined date. For example, a monthly report starting on March 1st displays data for the month of March up to March 31st.
Select the report’s Frequency. Choose between Weekly, Monthly or Quarterly.
Optional. Enter an Email address where you’d like to receive notifications when the report is available. A single email address can be entered.
Select the Affiliate ID as relevant for the report. Select No Affiliate if not required. The report is grouped by Affiliate, with a Summary for each grouping and a Grand Summary at the bottom of the report.
Optional. For Reports 2.0, complete the following substeps to only include subscriptions for specific products in the report:
1. Click the Products field. A list of the existing Products appears.
2. Enter the first letters of the relevant Product or scroll and select. The Product name appears.
3. To add an additional product, place your cursor in the field below the listed product and perform the previous steps again.
For Reports 2.0, select the relevant Time Zone for data range selection and display.
Optional. If you want to receive the report uploaded to an SFTP Server, enable this option and provide the required details. When enabled, a scheduled report will be uploaded to the specified SFTP Server. The SFTP report follows the <report name>-<frequency>-<timestamp>.csv naming convention where:
- <report name> is the name of the report
- <frequency> is the defined frequency such as monthly, weekly, quarterly, daily or once
- <timestamp> is the format YYYY-MM-DD”T”HH_MI_SS.TZ, where TZ is the timezone offset, for example, 2022-01-27T10_57_02.433174455Z. Note: An email notification is sent if there is an issue in generating or downloading the report on the specified SFTP Server.
For Reports 1.0, select the Display Columns you’d like to include in the report.
Click Submit. The report is submitted and will be generated according to the details provided. If you have provided an email or SFTP details, you will be notified when it is available for viewing.
View the report in the My Reports page.

Note: If using SFTP upload, this report’s <report name> is active_autobill_detail. Tip: The CSV version is designed to be programmatically consumable, and has a row for each Subscription Item, with the owning Subscription details repeated. You can apply grouping or pivoting to the resulting file for Subscription level counts.

Display Columns

Note: The report’s display columns order is machine-generated and may therefore change without prior notice.

Field	Description
Autobill Start Date (also known as Subscription Start Date)	The first day of the specified date range, if the Subscription was active for the Account on that date. Otherwise, the Start Date will be the date the Subscription was activated within that date range.
Autobill Entitled-Thru (End Date) (also known as Subscription End Date)	The last day of the specified date range if the Subscription was active on that date. Otherwise, the end date will be the date that the Subscription stopped being active within that date range.
Number of Days	The total number of days that this Subscription was active within the specified date range.
Account VID	A globally unique identifier that is created by Subscribe when you create an Account in the Subscribe database.
Customer ID	Unique merchant-assigned Account identifier.
Customer Name	The name of the customer entered while creating the Account.
Autobill ID (also known as Subscription ID)	The unique identifier that describes the terms of a customer’s recurring payments to a product or service.
Autobill VID (also known as Subscription VID)	A Vindicia-assigned unique identifier of the Subscription or service. It is returned in response to the Create Subscription API call.
Autobill Status (Deprecated) (also known as Legacy Subscription Status)	Status for a legacy Subscription. Values include: - New - Good Standing - Soft Error - Hard Error - Deferred - Stopped - Pending - Upgraded - PendingCustomerAction Note: This field represents the Subscription’s Billing Status, not its Entitlements’ status.
Autobill Status (also known as Subscription Status)	The current Status for the Subscription. Values include: - Active: The Subscription is actively granting entitled service and billing in accordance with the assigned Billing Plan and associated Subscription Items. - Cancelled: The Subscription is no longer actively granting service. It has been cancelled due to user, merchant, or system action—for example, the customer has opted out of recurring billing or canceled the service; API calls to cancel the subscription or stop billing on the Customer have been made; or if a chargeback is received against a transaction generated by the Subscription. Cancelled is a terminal and permanent status. The Billing condition of this Subscription is clarified by the current Billing State. Note that the customer who owns the Subscription is entitled until the Subscription’s end-date. - Deleted: The Subscription was administratively removed—the content of this status can only be displayed in custom and specialty reports. - Expired: The Subscription is no longer actively granting service—its fixed or non-recurring plan has ended and no further billing is scheduled or possible. - Legacy Suspended: This status is used in limited scenarios for legacy Subscriptions that ended with a Hard Fail status but which did not otherwise meet the conditions of the new status values. - Pending Activation: The Subscription has been fully created, has a start date that is in the future, and has not yet granted entitled service and is not yet billing. The Subscription start date can still be changed. - Pending Cancel: The Subscription is Active but scheduled for cancellation. The Subscription will leave active service at the current end date. - Processing: The Subscription is newly created and still being administratively defined. It is not currently providing entitled service and is not yet billing. Typically this status will be followed by Pending Activation where the Subscription has been completely created but has a future start date and is not yet entitled or billing. - Upgraded: A terminal status given to an older version of a Subscription that has been explicitly transitioned using the AutoBill.upgrade() API method. - Pending Pause: The Subscription is Active but scheduled for pause. The Subscription will be paused on the next pause start date. It will remain paused with no end date. - Paused: The Subscription is no longer actively granting service or being billed. If no other action is taken upon the Subscription (resume is not performed), it will remain paused for 5 years, and then automatically move to cancelled status.
Autobill Name (also known as Subscription Name)	Merchant assigned name to identify the Subscription on customer billing statements.
Autobill Created Date (also known as Subscription Created Date)	The date on which the Subscription was created.
Autobill Next Billing Date (also known as Subscription Next Billing Date)	The date on which the next billing for the Subscription occurs.
Currency	Currency type for the Subscription.
Amount	Amount charged for an item.
Specified Cycles	The number of billing cycles for an item or Subscription.
Remaining Cycles	The number of billing cycles remaining for an item or Subscription.
Entitled	Indicates whether the Subscription is actively granting service.
Affiliate ID	A free-form string (if any) for the affiliate who submitted the specified Subscription object.
Subaffiliate ID	A free-form string (if any) for the sub-affiliate who submitted the specified Subscription object.
Item Start Date	Date Subscribe begins charging for a service.
Vindicia Item ID	Unique identifier assigned to an item by Vindicia.
Item ID	A unique identifier for an item within a Subscription.
Item Removed Date	The date on which the specified item is removed from a Subscription.
Item Number	Identifying number of an item in a Subscription.
Merchant AB Item Identifier	Merchant-assigned identifier for the specified item in the Subscription.
Item Quantity	Total number of items in a Subscription.
Transitioned From	Unique (Vindicia or merchant) identifier of the SubscriptionItem. This item was replaced as the result of a Subscription modify call.
Transitioned To	Unique (Vindicia or merchant) identifier of the SubscriptionItem that replaced a previous item as the result of a Subscription modify call.
Item Added Date	The date on which the specified item was added to the Subscription.
Item VID	Unique identifier assigned to an item by Vindicia.
Product ID (SKU)	The Product identifier from the Subscription or Stock Keeping Unit (SKU) specified in the Transaction.
BillingPlan ID	Billing plan identifier.
Billing Plan	Name of the billing plan for the Subscription.
Billing Day	Particular day of the month on which the Subscription billing occurs.
Autobill Billing State (also known as Subscription Billing Date)	Administrative state of a Subscription. The billingState field contains the following values: - Good Standing: Billing for the current billing period was successful - Free/Trial: The subscriptions current Billing Period definition (as specified by the current Billing Plan) is forcibly free. This can be a temporary state or for the duration of the billing period configured to be free-or permanent if the Billing Plan is permanently free. This state does not apply when the free condition is arrived at due to a Campaign application. - In Retry: The Subscription is still active but in retry, and has at least one billing period in which there was a failed attempt to charge; the Subscription is still within the configured retry period and may yet be saved by automated processes or customer action. This state corresponds to the prior Soft Error status. In the new scheme, it will only be paired with the Active status. - Unusable Payment Method: The Subscription is still active but is in retry, and has at least one billing period in which there was a failed attempt to charge, and received an error code designated as a Hard Fail, which is expected to be unrecoverable. The Subscription will remain in this state, in the expectation that a new payment method will be provided by the customer, until the specified retry, or grace period, expires. This state corresponds to the previous Hard Error status when the subscription end date has not passed. - Billing Completed: The Subscription is not active; it successfully completed all required billing and has no further scheduled billings. - Failed to Collect: The Subscription is no longer active, having exhausted the retry period without a successful payment method update. This state corresponds to the previous Hard Error status, in which the Subscription end date has passed. This state will only exist for an Subscription with the status: Canceled. - Overdue: The Subscription is assigned a Merchant Accepted Payment (MAP) payment method (invoicing) and has at least one overdue invoice. - Pending Acceptance: The Subscription uses a payment method that requires merchant or customer action before charges can be processed, and is waiting on that external action or approval. - Free Period: The Subscription is currently in a free or $0 billing period for any period excepting a Free=True condition on the initial billing period only, (which uses the Free/Trial state). - Terminated: The Subscription has been forced into a terminal state by system or merchant action. No further billing is planned. - Grace Period: The Subscriptoin has an unpaid balance and is in the retry period but has passed the last scheduled retry attempt-the only path to recovery is a successful payment method update (usually customer intervention). The Subscription is still active and entitled until the end of the Grace Period.
Autobill Plan Campaign ID (also known as Subscription Plan Campaign ID)	Campaign code or campaign identifier of a product in the Subscription.
Item Campaign ID	Campaign code or campaign identifier of an item in the Subscription.
Parent topic:Subscription Reports

Home

Guides

APIs

To generate a one time report:

To schedule a recurring report:

Display Columns

​To generate a one time report:

​To schedule a recurring report:

​Display Columns

To generate a one time report:

To schedule a recurring report:

Display Columns